how to clean keyboards properly
 

Service: Cleaning instructions

You have opted for professional operating controls that are “Made in Germany” now that you have purchased a data input device made by GETT Gerätetechnik GmbH. We would like to support you with recommendations on how to clean the units and suitable cleaning agents so that the design and functions are maintained for as long as possible.

If you are uncertain about using your preferred cleaning agent or disinfectant, you can contact us at any time.

Cleaning stainless steel

Use a soft cloth and normal cleaning agents suitable for stainless steel surfaces when cleaning our keyboards. Place a small amount of the cleaner on the dampened cloth and remove any dirt with circular movements and only slight pressure. Then wipe the cleaned surface with a damp cloth in order to remove any remaining cleaning agent. When disinfecting, we recommend that you use an alcohol-based disinfectant in line with the manufacturer’s specifications.

Never use any abrasive substances, such as steel wool or aggressive scouring agents, to remove stubborn marks. Do not use any cleaning agents containing substances that are listed as non-resistant in the following table.

Resistance stainless steel

Cleaning glass, silicone and film

Use a soft cloth and a vinegar-based household cleaner to clean our keyboards. Exert slight pressure with the cloth, which has been soaked with the cleaner and then squeezed out, and remove any dirt with circular movements. Then wipe the cleaned surface with a damp cloth in order to remove any remaining cleaning agent. When disinfecting, we recommend that you use an alcohol-based disinfectant in line with the manufacturer’s specifications.

Never use any abrasive substances, such as steel wool or aggressive scouring agents, to remove stubborn marks. Do not use any cleaning agents containing substances that are listed as non-resistant in the following table.

Resistance glass, silicone and film

Cleaning plastic

Use a cleaning brush to clean our plastic keyboards in a dry state. You can also wet the keyboards to clean them if they have at least an IP65 degree of protection - e.g. to remove any sticky dirt. Use a cleaning brush and, if necessary, a normal cleaning agent under warm running water (max. +60°C) to clean our plastic keyboards.

Never use any abrasive substances, such as steel wool or aggressive scouring agents, to remove stubborn marks either. Do not use any cleaning agents containing substances that are listed as non-resistant in the following table.

Resistance plastic


Print Page | Download Page as PDF

Any questions?

Please call us at
+49 (0)37468 660222 or click HERE to get to the contact form.

Newsletter

Sign up to our newsletter:

Sign up

Copyright @ GETT Gerätetechnik 2019 Imprint | Data Privacy Policy | Terms and Conditions